PR-68 矽膠吸盤手機架
產品介紹
產品特色
- 碳纖紋路設計，充滿科技感運動風。
- 手機架固定適用67~90mm，厚度最大可11mm，重量200g以內。
- 操作簡單方便，可輕鬆裝上或取下您的產品。
- 可360度任意旋轉，自由調整，直看、橫看零死角。
- 超輕薄設計，不佔車內空間，輕鬆固定智慧型手機。
- 特殊材質加工處理而成，耐磨、耐摔、耐高溫。
- 橡膠防滑設計，不必擔心手機掉落。
- 扣壓式矽膠吸盤固定座，安裝簡易，可緊牢吸附於玻璃與儀表板平台上。
- 吸盤邊緣有剝離用附耳，方便拆卸。
- 內附圓形塑膠板，可黏貼於無法吸附之平台，以利吸附。
Features
1.Carbon fiber-like design with sporty appearance.
2.This product is applicable for those smartphones whose width is within 67-90mm, whose height is within 11mm, and whose weight is within 200g.
3.It is easy for you to assemble and use this product.
4.This product can be rotated 360°, so you can watch your smartphone in any way you like.
5.Ultra thin design and will not occupy too much space in your car.
6.This product has been under special process to make it shock-proof and heat-resistant.
7.The anti-shedding design will prevent your smartphone from dropping down.
8.By the silicone vacuum cup with buckle, this product can be fixed tightly either on your windshield or dashboard.
9.There is a handle on the vacuum cup, which is easy for you to remove this product from the windshield or dashboard.
10.There is an alternative round plastic board. If the vacuum cup is not suitable for your dashboard, you can paste the round plastic board onto your dashboard to make a suitable surface for the vacuum cup.
1.Carbon fiber-like design with sporty appearance.
2.This product is applicable for those smartphones whose width is within 67-90mm, whose height is within 11mm, and whose weight is within 200g.
3.It is easy for you to assemble and use this product.
4.This product can be rotated 360°, so you can watch your smartphone in any way you like.
5.Ultra thin design and will not occupy too much space in your car.
6.This product has been under special process to make it shock-proof and heat-resistant.
7.The anti-shedding design will prevent your smartphone from dropping down.
8.By the silicone vacuum cup with buckle, this product can be fixed tightly either on your windshield or dashboard.
9.There is a handle on the vacuum cup, which is easy for you to remove this product from the windshield or dashboard.
10.There is an alternative round plastic board. If the vacuum cup is not suitable for your dashboard, you can paste the round plastic board onto your dashboard to make a suitable surface for the vacuum cup.
產品規格
| 型號 Model |
PR-68 |
| 品名 Name of product |
矽膠吸盤手機架 Smartphone holder(with silicone vacuum cup) |
| 顏色 Color |
Black |
| 材質 Materials |
塑膠，泡棉膠
Plastic、Acryl foam tape
|
| 包裝尺寸 Package Size |
W12x D6 x H18 cm |
| 箱入數 Quantity/Carton |
60pcs |
| 條碼編號 Barcode |
4718639272991 |
注意事項●請勿安裝於影響安全帶動作之處，以免造成危險。
●禁止於駕駛中操作或調整本產品。
●請遠離火源，並請勿讓兒童接觸本產品。
●因使用不當或擅自改造所造成之損害，本公司不負任何法律責任。
Notice●Please do not assemble this product around the air bag or at the place which will obstruct the seatbelt.
●It is forbidden to use the product during driving.
●Do not place this product near fire, or the place which is easy for children to reach.
●We do not take any responsibility if any accident or breakdown caused by inappropriate usage.