PR-62 牌照框 (2入)
產品介紹
產品特色
- 碳纖紋路咬花處理，充滿科技感運動風，讓你的愛車與眾不同。
- 符合新式七碼汽車車牌規格，新舊規格車牌通用。
- 下框固定片加大特殊設計，讓車牌更牢固，更具保護效果。
- 背板加大保護車牌及車身不被刮傷。
- 保護車牌，在電動洗車作業時，不會損及車牌與愛車。
- 合法安裝使用，不擋車牌號碼辦識。
- 牌照框安裝簡單，DIY安裝不求人
Features
1.Carbon fiber-like design with sporty appearance.
2. This product is applicable for both previous and new license plate in Taiwan.
3.The special design of the fixing flake makes this product fixed on your car tightly.
4.The broadened back panel makes your car and your license plate not be scratched.
5.hen you are washing your car by automatic washing machine, this product can protect your car and your license plate.
6.This product will not obstruct the numbers on your license plate.
7.t is easy for you to assemble this product, so you can do it yourself.
1.Carbon fiber-like design with sporty appearance.
2. This product is applicable for both previous and new license plate in Taiwan.
3.The special design of the fixing flake makes this product fixed on your car tightly.
4.The broadened back panel makes your car and your license plate not be scratched.
5.hen you are washing your car by automatic washing machine, this product can protect your car and your license plate.
6.This product will not obstruct the numbers on your license plate.
7.t is easy for you to assemble this product, so you can do it yourself.
產品規格
| 型號 Model |
PR-62 |
| 品名 Name of product |
碳纖紋牌照框 License plate frame(Carbon fiber ) |
| 顏色 Color |
Black |
| 材質 Materials |
塑膠、金屬
Plastic、Metal
|
| 入數 Pieces |
2pcs |
| 包裝尺寸 Package Size |
W46x D2 x H21 cm |
| 箱入數 Quantity/Carton |
60sets |
| 條碼編號 Barcode |
4718639272939 |
注意事項●購買前請先確認適合安裝的尺寸規格，以免發生安裝不合車身的狀況發生。
● 車牌如有變形請勿安裝。
● 螺絲中心距車牌上緣至少需預留30mm平坦處。
● 安裝位置需為平面，不可彎曲突出。
● 請勿使用於其他用途。
● 車輛行駛前請確認本產品已緊牢地固定，以避免鬆脫掉落造成不必要的事故。
● 包裝面附有安裝範例照片供參考。
● 由於風雨、紫外線的影響，可能會有輕微退色情形發生敬請見諒。
● 洗車後請用乾布擦除水滴，請勿將溶劑或車蠟(汽油、揮發劑系)等製品接觸本產品以免變質。
● 請將本說明書妥善保管置於車內易取得處，詳細閱讀與遵守內容並實際執行。
● 本說明特別記載，未按照正確使用方式安裝、安裝錯誤、分解、改造而造成的事故、故障、損害發生，本公司不承擔任何責任。
Notice●Please check if this product is applicable for your car before purchasing.
● Please do not use this product on a deformed license plate.
● There should be at least 30 mm between the screw and the margin of the license plate.
● Please do not place this product on a slanted surface.
● Please do not make other usage on this product.
● Please make sure that this product is fixed tightly and will not come off to cause any accident.
● You can refer to the enclosed pictures for assembling instruction.
● The color of this product might fade due to the weather and sun exposure.
● Please wipe this product after washing your car. To prevent this product from deforming, please do not put it near solvent, wax, and gasoline.
● Please reserve this manual in car, and read it in detail.
● We do not take any responsibility if any accident, breakdown, and damage happens while using this product. Please agree this announcement before purchasing this product.