【G-M1D031】1-port RS485 Port Replicator
G-M1D031 | 1-port RS485 Port Replicator
| Built-in Ethernet RJ45 port for Ethernet connection | |
| Networking up to 921.6 kbps baud rate | |
| Real-time data transmit and receive | |
| The physical COM port is accessible via Windows DM | |
| 255 COM ports are set up on windows simultaneously. | |
| Auto connection & mapping with MAC address bound. | |
DevicePort Series - A Friendly Device that Suitable for Wide-range of systems!
G-M1D031 allows users to expand single RS-485 channel over Ethernet connection, and it works on any Windows-based desktop, thin-client, laptop, All-in-one, and tablet PC computers. With Advanio DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, Device Port creates physical COM ports that support real-time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; the user can expand RS-485 COM port easily without complex software configuration. Advanio Device Port improves remote RS-485 connectivity deployment efficiency to achieve greater reliability in industrial automation applications.
- Technical data: G-M1D031
| Serial Communication | |||
| Interface | RS-485 | Baud Rate | 50bps~921.6Kbps |
| Controller | DPL2000Q | Stop bit | 1,1.5,2 |
| BUS | Ethernet | Parity | Even, odd, none, mark, spaces |
| No. of Port | 1-port | Flow Control | Xon/Xoff(software) |
| FIFO | 1Kbyte Hardware/per port | Connector | Terminal Block(3-pin) |
| Signal | RS-485: Data+, Data-, GND (note: This item supports RS-485 connectivity only) | ||
| Protection | ±15KV ESD IEC6000-4-2 Air Discharge ±8KV ESD IEC61000-4-2 Contact Discharge |
||
| Ethernet Communication | |||
| Number of Ports | 1-port | ||
| Speed | 0/100Mbpd, auto MDI/MDIX | ||
| Connector | RJ45 | ||
| Protection | 1.0K Built-in Magnetic Isolation Protection | ||
| Power Requirement | |||
| Input Voltage | 12V~24VDC | ||
| Power Consumption | 2.5W | ||
| Connector | Terminal Block(3-pin) | ||
| Driver Support | |||
| Microsoft Client | XP(X86)/7/8/8.1/10(X86/X64) | ||
| Microsoft Server | 2003/2008/2012R2(X64) | ||
| Regulatory Approvals | |||
| EMC |
|
||
| Green | RoHS, CRoHS, WEEE | ||
| Environment | |||
| Operation Temperature | 0 to 60°C (32 to 140°F) | ||
| Operation Humidity | 5 to 95% RH (non-condensing) | ||
| Storage Temperature | -20 to 85°C (-4 to 185°F) | ||
| Physical Characteristics | |||
| Housing | Aluminum | ||
| Weight | 188 g | ||
| Installation | DIN-rail | ||
| IP Rating | IP30 protection | ||
| Dimensions |
 |
||
1. G-M1D031, 1-port Ethernet enabled RS-485 Port Replicator
2. Din Rail Mounting kit x1 set
3. Quick Installation Guide
| Converter | |
| G-M1A021 | USB to RS-232/422/485 Converter |
| G-M1A011 | RS-485 to RS-232 Converters |
| G-M1D031 | 1-port RS485 Port Replicator |
| Digital & Relay Module of WiFio Series (Wi-Fi, Ethernet with Modbus TCP) | |
| WiFio-301 | 16-Ch Digital Input Module |
| WiFio-302 | 32-Ch Digital Input Module |
| WiFio-401 | 16-Ch Digital Output Module |
| WiFio-402 | 32-Ch Digital Output Module |
| WiFio-403 | 8-Ch Relay Output Module |
| WiFio-404 | 16-Ch Relay Output Module |
| WiFio-501 | 16-Ch Digital Input/16--Ch Digital Output Module |
| WiFio-502 | 16-Ch Digital Input/8--Ch Relay Output Module |
| Analog Modules of WiFio Series (Wi-Fi, Ethernet Modbus TCP) | |
| WiFio-103 | 8-Ch Universal Analog Input Module with High Voltage Protection |
| WiFio-104 | 16-Ch- Universal Analog Input Module with High Voltage Protection |
| WiFio-107 | 8-Ch Thermocouple Input Module |
| WiFio-108 | 16-Ch Thermocouple Input Module |
| WiFio-109 | 8-Ch Current Input Module |
| WiFio-110 | 16-Ch Current Input Module |
| WiFio-111 | 8-Ch Voltage Input Module |
| WiFio-112 | 16-Ch Voltage Input Module |
| WiFio-113 | 6-Ch RTD Input Module |
| WiFio-115 | 8-Ch Voltage / Current Input Module with High Voltage Protection |
| WiFio-116 | 16-Ch Voltage / Current Input Module with High Voltage Protection |
| WiFio-201 | 8-Ch Analog Output Module |