EJ898N
Legal
This is a confidential and proprietary document of Etron Technology, Inc. Any unauthorized use, reproduction, duplication, or disclosure of this document will be subject to the applicable civil and/or criminal penalties.
This document may be modified or revised subject to the discretion of Etron Technology, Inc. without further notice. Etron Technology, Inc. makes no warranty or representation to either the contents of this document or the products referenced in this document for any errors or omissions.
EJ898N is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revision 2.0. The PD controller can negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.
EJ898N can be configured by serial EEPROM or embedded OTP.
EJ898N integrates 3.3V to 1.8V LDO to reduce component cost and take advantage of limited PCB space.
 |
- USB Power Delivery Specification
- Support PD provider mode
- Support all PD profile 0~5
- Support baseband BMC coding for USB Type-C specification
- Support detection of connection on Configuration Channel
- Support Vconn power switch control
- Pull-up/Pull-down resistor (Rp/Rd) integrated
- Vconn power switch integrated
- Power Saving Capability
- EJ898N can enter suspend mode to synchronize with system power state.
- EJ898N can keep charging plug-in device while system is in suspend mode.