Name: Silicom fbC2CGg5 10/25/40/100G FPGA 封包擷取卡
Brand: 辰亞科技股份有限公司
SKU: NO554

Silicom fbC2CGg5 10/25/40/100G FPGA 封包擷取卡

◆ 零封包遺失和硬體封包處理引擎
◆ 2x100GE/40GE鏈路速度
◆ 8x10GE和8x25GE的鏈路速度
◆ 封包過濾、高級處理、流量管理
◆ 負載平衡和主機卸載機制
◆ 標準gen3 x16 PCIe 連接器
◆ Precision timestamping
◆ 3.2 nano second resolution
◆ Microsecond latency
◆ fbCAPTURE API
◆ 提供高達 107 Gbps 輸出入頻寬
◆ 卡間連接和第二個插槽連接，雙倍 PCIe 頻寬

原廠: Silicom Ltd.

產品說明

Silicom fbC2CGg5 10/25/40/100G封包擷取卡，提供網路連接和直接資料擷取到主機之內存記憶體，零封包遺失和硬體式封包處理引擎。 2xQSFP28 插槽支援 2x100GE/40GE、8x10GE 和 8x25GE 的鏈路速度。 fbC2CGg5 卡基於 Kintex UltraScale+ 系列中的尖端 Xilinx FPGA 技術，提供封包過濾、高級處理、流量管理、負載平衡和主機卸載機制。

此款高性能硬體平台，使用 QSFP28/QSFP+/SFP28 收發器連接到網路，並執行封包處理，同時使用完全支持標準 gen3 x16 的標準 PCIe 連接器，為主機內建記憶體提供高達 107 Gbps 的輸出入頻寬。fbC2CGg5 使用單插槽 x16 通道 PCIe 解決方案。該卡已準備好進行卡間連接和第二個插槽連接，以便為主機系統提供雙倍 PCIe 頻寬。 NUMA 特定的記憶體配置，使 NUMA 環境中能夠進行有效的流量管理和負載平衡。

檔案下載

2 x 100GE/40GE/25GE, 8 x 10GE and 8 x 25GE
PCIe form-factor: Full height, half length (111.15 x 167.65 mm)
16 GB 72-bit Error-correcting code (ECC) DDR4 RAM
107 Gbps sustained capture to host
16-lane PCIe Gen3
Precision timestamping
3.2 nano second resolution
Microsecond latency
fbCAPTURE API
Hardware filtering and traffic distribution
Application acceleration and scalability

Network Interface:
IEEE standard:	IEEE 802.3 10GE, 40GE, 25GE, 100GE
Interfaces:	Support Forward Error Correction (FEC) on 100GE Physical interface: 2 x QSFP28 slots 10GE supported through break-out cable assemblies 2 x 25 SFP28 through QSA28 adaptor Supported QSFP28 modules (25GE/100GE): SR4, LR4, PSM4, CWDM4/CLR4, CR4 (DAC), ER4 Appropriate 4 x 25GE break-out modules Supported QSFP+ modules (10GE/40GE): SR4, LR4, LM4, PSM4/IR4, CDWM4, ER4, ZR4, BiDi, CR4 Appropriate 4 x 10GE break-out modules Ethernet PHY directly embedded in FPGA
Host Interface:
PCI bus:	16 lane PCIe Gen 3 PCIe compliant
Host interface	64 logical channels that can be connected to DMA or egressed to physical output ports
On Board Memory:
On Board Memory:	On board buffering for application robustness 16 GB 72-bit Error-correcting code (ECC) DDR4 RAM
Performance:
Capture rate:	Capture rate (bursts): Line rate (200 Gbps) Capture rate (sustained): 107 Gbps to host memory
General Technical Specifications
Latency:	Less than 3.2 μs to host memory Less than 3.2 μs from host memory to Tx Non-blocking sending, allowing user applications to operate independently
Time Stamping and Sync:	Resolution = 3.2 ns Accuracy down to 20 ns Daisy chain PPS between multiple cards supported Via COAX or Card interconnect adapter Strict Host based sync available in driver PPS synchronization via SMA connector
Configuration:	Dual boot images with automatic fallback to fail-safe image Full configuration and firmware upgrades via supplied tools or fbCAPTURE API
Environment:	Full height, ½ length. 111.15 x 167.65 mm with bracket Weight: 485 g Operating temperature: 0 – 55°C, 30 – 130°F Operating humidity: 20 – 80% Hardware compliance: RoHS, CE Active cooling, with fan sensor Passive cooling (option)
Additional Board Support:	fbCAPTURE API PF_RING and nTop suite support DPDK support libPCAP support On-board temperature sensors On-board multi-color status, Link and Activity LED for ports HW prepared for direct Card to Card interconnect and second PCIe slot connection

P/N

Firmware for all links speeds below are available with any variant

fbC2CGg5-8x10G for 10GE

fbC2CGg5-2x25G for 25GE (Excl QSA28 adaptors)

fbC2CGg5-2x40G for 40GE

fbC2CGg5-2x100G for 100GE (Limited HW filter capacity)

功能特性

2 x 100GE/40GE/25GE, 8 x 10GE and 8 x 25GE
PCIe form-factor: Full height, half length (111.15 x 167.65 mm)
16 GB 72-bit Error-correcting code (ECC) DDR4 RAM
107 Gbps sustained capture to host
16-lane PCIe Gen3
Precision timestamping
3.2 nano second resolution
Microsecond latency
fbCAPTURE API
Hardware filtering and traffic distribution
Application acceleration and scalability

技術規格

Network Interface:
IEEE standard:	IEEE 802.3 10GE, 40GE, 25GE, 100GE
Interfaces:	Support Forward Error Correction (FEC) on 100GE Physical interface: 2 x QSFP28 slots 10GE supported through break-out cable assemblies 2 x 25 SFP28 through QSA28 adaptor Supported QSFP28 modules (25GE/100GE): SR4, LR4, PSM4, CWDM4/CLR4, CR4 (DAC), ER4 Appropriate 4 x 25GE break-out modules Supported QSFP+ modules (10GE/40GE): SR4, LR4, LM4, PSM4/IR4, CDWM4, ER4, ZR4, BiDi, CR4 Appropriate 4 x 10GE break-out modules Ethernet PHY directly embedded in FPGA
Host Interface:
PCI bus:	16 lane PCIe Gen 3 PCIe compliant
Host interface	64 logical channels that can be connected to DMA or egressed to physical output ports
On Board Memory:
On Board Memory:	On board buffering for application robustness 16 GB 72-bit Error-correcting code (ECC) DDR4 RAM
Performance:
Capture rate:	Capture rate (bursts): Line rate (200 Gbps) Capture rate (sustained): 107 Gbps to host memory
General Technical Specifications
Latency:	Less than 3.2 μs to host memory Less than 3.2 μs from host memory to Tx Non-blocking sending, allowing user applications to operate independently
Time Stamping and Sync:	Resolution = 3.2 ns Accuracy down to 20 ns Daisy chain PPS between multiple cards supported Via COAX or Card interconnect adapter Strict Host based sync available in driver PPS synchronization via SMA connector
Configuration:	Dual boot images with automatic fallback to fail-safe image Full configuration and firmware upgrades via supplied tools or fbCAPTURE API
Environment:	Full height, ½ length. 111.15 x 167.65 mm with bracket Weight: 485 g Operating temperature: 0 – 55°C, 30 – 130°F Operating humidity: 20 – 80% Hardware compliance: RoHS, CE Active cooling, with fan sensor Passive cooling (option)
Additional Board Support:	fbCAPTURE API PF_RING and nTop suite support DPDK support libPCAP support On-board temperature sensors On-board multi-color status, Link and Activity LED for ports HW prepared for direct Card to Card interconnect and second PCIe slot connection