 |
GO
DC1994A & DC2050A
Production information
 |
G45 | Z45 | T40 Planar Transformer & Inductors
Forward Active Clamp Topology Highest Efficiency attributable to Planar Design. Aggressive Interleave by design results in lowest achievable Leakage Inductance.
Multilayer PCB optimization for lowest AC resistance and Proximity Effect .
Wide variety of Turns Ratios in stock but not shown in Table.
Contact Us for Module Design and SM Assembly of all component for DC-DC Converter |
1. Reference Design DC1994A based Input Voltage Range 18-72V
Also: Champs G45 Series Part Numbers and Data Sheets
| Champs PN | Vin (Min) | Vin (Max) | Vout | Io |
| G45AH2-0404-04 | 18 | 72 | 12.0 | 12.0 |
 |
 |
® Linear Technology Inc
2. Reference Design DC2050A based Input Voltage Range 9-36 |18-72V |36-72
Also: Champs G45 Series Part Numbers and Data Sheets
 |
DC1494A Reference Design Page |
2. Reference Design DC2050A based Input Voltage Range 9-36 |18-72V |36-72
Also: Champs G45 Series Part Numbers and Data Sheets
| Champs PN | Vin (Min) | Vin (Max) | Vout | Io |
| G45r2-0209 | 36 | 72 | 5.0 | 20.0 |
 |
 |
® Linear Technology Inc
3. LT3753 based Input Voltage Range 9-60| 60-180 PoE High Power.
Champs Part Number and Data Sheet ( Contact Us )
|
DC2050A Reference Design Page
|
3. LT3753 based Input Voltage Range 9-60| 60-180 PoE High Power.
Champs Part Number and Data Sheet ( Contact Us )
4. LT3752-1 based Input Voltage Range 75-150 PoE High Power.
Champs Part Number and Data Sheet ( Contact Us )
4. LT3765 based Input Voltage Range 9-360| 18-72| 36-72
Champs Part Number and Data Sheet ( Contact Us )
| Notes: | |
| 1. | Consult Linear Tech Ref Design BOM and Schematic for exact device as specified for use by Linear in that Reference Design. |
| 2. | In all cases Champs Technologies makes no representation as to suitability of the Reference Design itself as that is the design responsibility and Intellectual Property of Linear Technology. |
| 3. | Champs Technologies responsibility is limited to the use of its component as described in the Data Sheet and any warranty express or implied is limited to component replacement if found defective. |
| 1. | Options supplied as discrete component or integrated into a complete DC-DC Converter Module: |
| 2. | Surface Mount Discrete Component Design (as per above Data Sheets). |
| 3. | Discrete Component Implemented in Pad-to-Pad Mounting. |
| 4. | Component implemented as Half-Embedded Design + SM Assembly of all components required of DC-DC Converter. |
| 5. | Implemented as a Fully Embedded Design + SM Assembly of all components required of DC-DC Converter. |
| 6. | SMT Component Assembly of PCB Including Planar Magnetics Inclusive of Converter Testing. Volume capacity 100K per month. |